COMPLETION HERE! 1952 Vincent Black Shadow, Series “C” – All Matching numbers
At last, the B30B project is about done. This remarkable Black Shadow, originally sent to America in the day and specifically to San Francisco, according to the factory build documents, is very close to its start-up. As the images show, at least some do, its in the wiring stage and then the cables and fuel lines go on.
More than any other Shadow we’ve done in the last few years, B30B, THE GOLDEN GATE BIKE, has incorporated into it so many original small parts, being the nuts, bolts, washers, screws and special parts all of which we have carefully checked and then had cadmium plated in white cadmium plating. The result is the original finish and much lighter than the grey look of stainless parts which are all you can buy today if you don’t have original parts. Notice that on the inlet manifolds.
This motorcycle had no broken cylinder fins to start, the cases match and it even shows to have the original, three-weight wheel balancing equipment as per original factory equipment. Clutch and front brake levers are original, but rechromed by our platers. The curve to them is smooth and not a series of three sharper bends featured on the current crop of Chinese copies supplied to restorers.
The French-built electric starter on this bike ensures it will be a joy and not an episode of frustration or embarrassment when you take a ride on your Shadow with friends. Moreover, prior batteries we found were only good for 4 tries. If the engine gets flooded, that’s it for awhile. Now, with the latest ones which still fit inside the original battery shell, you can crank the engine for several minutes—it’d overheat the starter I’m certain and ruin it, but the battery has that much reserve. Our customers like to ride, not change sparking plugs.
New saddles from our master maker in California, Michael Maestas have arrived and we now stock both saddles from him in the early and late stitch patterns, depending on the completion date of your Shadow.
The Golden Gate Shadow had a buyer, but is available. For those of you who follow the info on the site, you know that we believe not every buyer is right for an HVG bike. This proved to be the case with the B30B bike and we had to “fire” the prospective buyer as I was fairly sure his expectations couldn’t be met by any bike. It’s hard to take points off the board, but in the hopes he’ll be happier down the line and we’d be happier down the line, you now have a shot at this great bike.
Inside the engine, the polished aluminum steady plate will be laser-engraved with the engine number, the date it was restored by HARRIS VINCENT GALLERY and your name as the original owner. Inside, but you’ll know its there and we’ll have a photo for you of it. As always, we will present the buyer with the three items accompanying each new Vincent Black Shadow originally. These include the RIDER’S HANDBOOK, a tool kit in a custom leather tool pouch with our Rollie trademark and a British made tyre inflator (tire pump) which fits on the lower right edge of the petrol tank.
It is the best in the world. Its sister bike was recently on the cover of ROBB REPORT- COLLECTIONS and the upcoming issue of ULTIMATE MOTORCYCLING will have a feature and cover on another of our Black Shadows. Why? They’re the best. We can only make a few and that’s all we really want to build.
For more info about our bikes visit www.harrisvincentgallery.com.